26 Amendments of Romana TOMC related to 2022/0396(COD)
Amendment 117 #
Proposal for a regulation
Recital 11
Recital 11
(11) An item, which is an integral part of a product and is necessary to contain, support or preserve that product throughout its lifetime and where all elements are intended to be used, consumed or disposed of together, should not be considered as being packaging given that its functionality is intrinsically linked to it being part of the product. However, in light of the disposal behaviour of consumers regardingefforts to establish appropriate recycling and composing streams, tea and coffee bags as well as coffee or tea system single-serve units, which in practice are disposed of together with the product residue leading to the contamination of compostable and recycling streams, those specific items should be treated as packaging. This is in line with the objective to increase the separate collection of bio-waste, as required by Article 22 of Directive 2008/98/EC of the European Parliament and of the Council41 . Furthermore, to ensure coherence regarding end-of-life financial and operational obligations, also all coffee or tea system single-serve units necessary to contain coffee or tea should be treated as packaging. __________________ 41 Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives (OJ L 312, 22.11.2008, p. 3).
Amendment 155 #
Proposal for a regulation
Recital 38
Recital 38
(38) In order to facilitate conformity assessment with requirements on compostable packaging, it is necessary to provide for presumption of conformity for compostable packaging which is in conformity with harmonised standards adopted in accordance with Regulation (EU) No 1025/2012 of the European Parliament and of the Council56 for the purpose of expressing detailed technical specifications of those requirements and take into account, in line with the latest scientific and technological developments, the parameters, including composting times and admissible levels of contamination, which reflect the actual conditions in bio- waste treatment facilities, including anaerobic digestion processesquality of the output, composting proper processing times and admissible levels of contamination. __________________ 56 Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council Text with EEA relevance (OJ L 316, 14.11.2012, p. 12).
Amendment 158 #
Proposal for a regulation
Recital 40
Recital 40
(40) Packaging should be designed, where relevant for a given shape, so as to minimise its volume and weight while maintaining its ability to perform the packaging functions. The manufacturer of packaging should assess the packaging against the performance criteria, as listed in Annex IV of this Regulation. In view of the objective of this Regulation to reduce packaging and packaging waste generation and to improve circularity of packaging across the internal market, it is appropriate to further specify the existing criteria and to make them more stringent. The list of the packaging performance criteria, as listed in the existing harmonised standard EN 13428:200057 , should therefore be modified. While marketing and consumer acceptance remain relevant for packaging designpresentation, design and differentiation functionality, they should not be part ofthe main performance criteria justifying on their own additional packaging weight and volume. However, this should not compromise product or packaging specifications for craft and industrial products and food, beverages and agricultural products that are registered aund protected under the EU geographical indication protection schemeer or otherwise protected by the Union intellectual property law or EU geographical indication protection schemes, including third country geographical indication that have been given distinctive recognition by the Union, as part of the Union’s objective to protect Intellectual property rights, cultural heritage and traditional know-how. Traditional packaging associated with products that have been granted distinctive recognition or that are subject to geographical indication of origin protection shall, however, seek to reduce packaging weight to the smallest amount possible while protecting the shape of the packaging in accordance with the overall ambitions of this proposal. On the other hand, recyclability, the use of recycled content, and re-use may justify additional packaging weight or volume, and should be added to the performance criteria. Packaging with double walls, false bottoms and other characteristics only aimed to increase the perceived product volume should not be placed on the market, as it does not meet the requirement for packaging minimisation. The same rule should apply to superfluous packaging not necessary for ensuring packaging functionality. __________________ 57 Packaging – Requirements specific to manufacturing and composition – Prevention by source reduction.
Amendment 163 #
Proposal for a regulation
Recital 42
Recital 42
(42) In order to facilitate conformity assessment with requirements on packaging minimisation, it is necessary to provide presumption of conformity for packaging which is in conformity with harmonised standards adopted in accordance with Regulation (EU) No 1025/2012 for the purpose of expressing detailed technical specifications of those requirements and specify measurable design criteria, including where appropriate, maximum weight or empty space limits for specific packaging formats as well as by-default, standardised packaging designs that comply with the packaging minimisation requirement. Packaging design and minimisation should not compromise the requirements specified under EU rules on food contact materials and they should not affect the food safety of the products.
Amendment 164 #
Proposal for a regulation
Recital 43
Recital 43
(43) To promote the circularity and sustainable use of packaging, reusable packaging and systems for re-use should be incentivised without prejudice to Article 4(2) of Directive 2008/98/EC and where re-use does not pose risks to the quality of food and/or compromises food safety of the products. For that purpose, it is necessary to clarify the notion of reusable packaging and to ensure that it is linked not only to the packaging design, which should enable a maximum number of trips or rotations and maintaining the safety, quality and hygiene requirements when being emptied, unloaded, refilled or reloaded, but also to the setting up of systems for re-use respecting minimum requirements as set out in this Regulation. In order to facilitate conformity assessment with requirements on reusable packaging, it is necessary to provide for presumption of conformity for packaging which is in conformity with harmonised standards adopted in accordance with Regulation (EU) No 1025/2012 for the purpose of expressing detailed technical specifications of those requirements and define reusable packaging criteria and formats, including minimum number of trips or rotations, standardised designs, as well as requirements for systems for re-use, including hygiene requirements. In light of the significant amount of water needed to implement a re-use system, especially for food and beverages and at industrial level, Member States should maintain a level of flexibility in adopting such provision. The Commission should produce a risk assessment of the implementation of reusable packaging vis-à-vis EU water management strategy and European water waste reduction targets.
Amendment 168 #
Proposal for a regulation
Recital 44
Recital 44
(44) It is necessary to inform consumers and to enable them to appropriately dispose of packaging waste, including compostable lightweight and very lightweight plastic carrier bags. The most appropriate manner to do this is to establish a harmonised labelling system based on the material composition of packaging for sorting of waste, and to pair it with corresponding labels on waste receptacles. To this end, the European Commission and Member States shall provide the necessary tools and incentives, including economic ones, with special attention to micro and small enterprises
Amendment 179 #
Proposal for a regulation
Recital 47
Recital 47
(47) In order to inform end-users about reusability, availability of systems for re- use and location of collection points as regards reusable packaging, such packaging should bear a QR code or other data carrier that provides such information. The QR code should also facilitate tracking and the calculation of trips and rotations. In addition, reusable sales packaging should be clearly identified at the point of sale.
Amendment 188 #
Proposal for a regulation
Recital 54
Recital 54
(54) In order to safeguard the functioning of the internal market, it is necessary to ensure that packaging from third countries entering the Union market comply with this Regulation, whether imported as self-standing packaging or in a packaged product. In particular, it is necessary to ensure that appropriate conformity assessment procedures have been carried out by manufacturers with regard to that packaging. Importers should therefore ensure that the packaging they place on the market comply with those requirements and that documentation drawn up by manufacturers are available for inspection by the competent national authorities. To comply with these obligations, adequate support should be provided to non-professional importers, especially to micro and SMEs.
Amendment 194 #
Proposal for a regulation
Recital 64
Recital 64
(64) Reusable packaging becomes waste, in the sense of the Article 3(1) of Directive 2008/98/EC, when its holder discards it, intends to discard it or is obligated to discard it. Reusable packaging in a reconditioning process is normally not considered to be waste.
Amendment 344 #
Proposal for a regulation
Article 11 – paragraph 1 – subparagraph 1
Article 11 – paragraph 1 – subparagraph 1
From [OP: Please insert the date = 4236 months after the entry into force of this Regulation], packaging shall be marked with a label containing information on its material composition. This obligation does not apply to transport packaginge delegated act referred to in paragraph 5, information to facilitate consumer sorting shall be marked on the packaging or shall be available through digital means according to Article 11(4). This obligation does not apply to transport packaging, to packaging mentioned in Article 7(3), retail packaging subject to final packaging, as in the case of over the counter food sales, and to reusable gas receptacles. However, it applies to e- commerce packaging.
Amendment 360 #
Proposal for a regulation
Article 11 – paragraph 1 – subparagraph 2
Article 11 – paragraph 1 – subparagraph 2
Packaging subject to deposit and return systems referred to in Article 44(1) shall, in addition to the labelling referred to in the first subparagraph, be marked with a harmonised label established in the relevant implementing act adopted pursuant to paragraph 5.
Amendment 364 #
Proposal for a regulation
Article 11 – paragraph 2
Article 11 – paragraph 2
2. From [OP: Please insert the date = 48 months after the date of entry into force of this Regulation],e implementing act referred to in paragraph 5, reusable packaging shall bear a label on packaging reusability andor shall be available through a QR code or other type of digital data carrier that provides further information on packaging reusability including the availability of a system for re-use and of collection points, and that facilitates the tracking of the packaging and the calculation of trips and rotations. In addition, reusable sales packaging shall be clearly identified and distinguished from single use packaging at the point of sale. The marketing authorization holder is permitted to transmit the package leaflet's information via digital data carrier for medicinal products as defined in Article 1, point (2) of Directive 2001/83/EC and as required by Articles 59 and 52 of that same directive.
Amendment 376 #
Proposal for a regulation
Article 11 – paragraph 3
Article 11 – paragraph 3
3. Where a unit ofplastic packaging covered by Article 7 is marked with a label containing information consumer relevant information on the share of recycled content, that label from post-consumer plastic waste, that label or a QR code or other type of digital data carrier shall comply with the specifications laid down in the relevant implementing act adopted pursuant to Article 11(5) and shall be based on the methodology pursuant to Article 7(7). Where a unit of plastic packaging is marked with a label containing information on the share of biobased plastic content, that label shall comply with the specifications laid down in the relevant implementing act adopted pursuant to Article 11(5).
Amendment 385 #
Proposal for a regulation
Article 11 – paragraph 4 – subparagraph 1
Article 11 – paragraph 4 – subparagraph 1
Labels referred to in paragraphs 1 to 3 and the QR code or other type of digital data carrier referred to in paragraph 2 shall be placed, printed or engraved visibly, clearly legibly and indelibly on the packaging. Where this is not possible or not warranted on account of the nature and size of the packaging, they shall be affixed to the grouped packaging information should be conveyed to consumers via digital means of communication as QR code or they shall be affixed to the grouped packaging. Information must be provided through the outer packaging, as defined in Article 1, Point (24), of Directive 2001/83/EC, for all immediate packaging, as defined in Article 1, Point (23), of Directive 2001/83/EC. From [Please insert the date = 24 months after the entry into force of this Regulation] the Commission shall adopt guidance regarding provision of information by digital means.
Amendment 391 #
Proposal for a regulation
Article 11 – paragraph 4 – subparagraph 1 a (new)
Article 11 – paragraph 4 – subparagraph 1 a (new)
The information referred to in paragraphs 1 through 3 may, as a derogation from paragraph 4, be provided by electronic means that are specified on the package or on a label that is attached to it. In such cases, the following requirements apply: a) no user data shall be collected or tracked; b) the information shall not be displayed with other information intended for sales or marketing purposes.
Amendment 400 #
Proposal for a regulation
Article 11 – paragraph 5
Article 11 – paragraph 5
5. By [OP: Please insert the date = 182 months after the date of entry into force of this Regulation], the Commission shall adopt implementing acts to establish a harmonised label and specifications for the labelling requirements and formats for the labelling of packaging referred to in paragraphs 1 to 3 and the labelling of waste receptacles referred to in Article 12. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 59(3).
Amendment 404 #
Proposal for a regulation
Article 11 – paragraph 6
Article 11 – paragraph 6
6. By [OP: Please insert the date = 124 months after the date of entry into force of this Regulation], the Commission shall adopt implementing acts to establish the methodology for identifying the material composition of packaging referred to in paragraph 1packaging materials by means of digital marking technologies. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 59(3).
Amendment 410 #
Proposal for a regulation
Article 11 – paragraph 7
Article 11 – paragraph 7
7. Without prejudice to requirements concerning other harmonised EU labels, Member States shall not require economic operators shall noto provide or display labels, marks, symbols or inscriptions that are likely to mislead or confuse consumers or other end users with respect to the sustainability requirements for packaging, other packaging characteristics or packaging waste management options, for which harmonised labelling has been laid down in this Regulation. From [Please inset the date = 24 months after the entry into force of this Regulation] the Commission shall adopt guidance regarding aspects that are likely to mislead or confuse consumers or other end users.
Amendment 418 #
Proposal for a regulation
Article 11 – paragraph 8
Article 11 – paragraph 8
8. Packaging included in an extended producer responsibility scheme or covered by a deposit and return system other than that referred to in Article 44(1) mayshall be identified by means of a corresponding symbol throughout the territory in which that scheme or system applies. That symbol shall be clear and unambiguous and shall not mislead consumers or users as to the recyclability or reusability of the packagingharmonized symbol to be designed via an implementing act by the Commission in accordance with the examination procedure referred to in Article 59 (3).
Amendment 424 #
Proposal for a regulation
Article 11 – paragraph 8 a (new)
Article 11 – paragraph 8 a (new)
8a. Packaging produced or imported prior the deadlines referred to in paragraphs 1, 2 and 3, may be put into the market until 36 months after the entry into force of this Regulation.
Amendment 453 #
Proposal for a regulation
Article 13 – paragraph 6 a (new)
Article 13 – paragraph 6 a (new)
6a. With regard to this Regulation, for medicinal products, as defined in Article 1, point (2), of the Directive 2001/83/EC, the information provided shall be of the marketing authorisation holder, as provided by Article 6.1a of the Directive 2001/83/EC.
Amendment 465 #
Proposal for a regulation
Article 13 – paragraph 9 a (new)
Article 13 – paragraph 9 a (new)
9a. The provisions of paragraphs 1 to 6 shall not apply to custom transport packaging for configurable devices and system, that are destined to be used use in industrial and healthcare environments.
Amendment 606 #
Proposal for a regulation
Article 52 – paragraph 1 – subparagraph 1
Article 52 – paragraph 1 – subparagraph 1
Without prejudice to Article 19 of the Regulation (EU) 2019/1020, where the market surveillance authorities of one Member State have sufficient reason to believe that packaging covered by this Regulation presents a risk to the environment or human health, they shall carry out an evaluation in relation to the packaging concerned covering all requirements laid down in this Regulation that are relevant to the risk. The relevant economic operators shall cooperate as necessary with the market surveillance authorities.
Amendment 607 #
Proposal for a regulation
Article 52 – paragraph 1 – subparagraph 2
Article 52 – paragraph 1 – subparagraph 2
Where, in the course of that evaluation, and following a process where objections raised by economic operators have been considered, the market surveillance authorities find that the packaging does not comply with the requirements laid down in this Regulation, they shall without delay require the relevant economic operator to take appropriate and proportionate corrective measures, within a reasonable period prescribed by the market surveillance authorities which is commensurate with the nature and, where relevant the degree of the non-compliance, to bring the packaging in compliance with those requirements. The evaluation of market surveillance authorities shall be based on due process.
Amendment 609 #
Proposal for a regulation
Article 52 – paragraph 4
Article 52 – paragraph 4
4. The economic operator shall ensure that all appropriate corrective measures is taken in respect of all the concerned packaging, following due process, that the economic operator has made availableplaced on the market throughout the Union.
Amendment 611 #
Proposal for a regulation
Article 54 – paragraph 1
Article 54 – paragraph 1
1. Where, having carried out an evaluation under Article 52, and following a process where objections raised by economic operators have been considered, a Member State finds that although packaging is in compliance with the applicable requirements set out in Articles 5 to 11, it presents a risk to the environment or human health, it shall without delay require the relevant economic operator to take all appropriate measures, within a reasonable period prescribed by the market surveillance authorities and commensurate with the nature and, where relevant, the degree of risk, to ensure that the packaging concerned, when placed on the market, no longer presents that risk, to withdraw the packaging from the market or to recall it. The evaluation of market surveillance authorities shall be based on due process