9 Amendments of Marek Paweł BALT related to 2023/0081(COD)
Amendment 162 #
Proposal for a regulation
Recital 10
Recital 10
(10) To achieve the 2030 objectives a particular focus is needed on some of the net-zero technologies, also in view their significant contribution towards the path to net zero by 2050. These technologies include solar photovoltaic and solar thermal technologies, onshore and offshore renewable technologies, battery/storage technologies, heat pumps and geothermal energy technologies, electrolysers and fuel cells, sustainable biogas/biomethane, carbon capture, utilization and storage technologies, electricity and hydrogen - based technologies for low-carbon steel, both in primary and secondary steel production route, e.g. hydrogen based direct reduction, electric arc furnaces, electricity and hydrogen powered heating and reheating furnaces, and grid technologies. These technologies play a key role in the Union’s open strategic autonomy, ensuring that citizens have access to clean, affordable, secure energy. Given their role, these technologies should benefit from even faster permitting procedures, obtain the status of the highest national significance possible under national law and benefit from additional support to crowd-in investments.
Amendment 486 #
Proposal for a regulation
Article 3 – paragraph 1 – point a
Article 3 – paragraph 1 – point a
(a) ‘net-zero technologies’ means renewable energy technologies66 ; electricity and heat storage technologies; heat pumps; grid technologies; renewable fuels of non-biological origin technologies; sustainable alternative fuels technologies67 ; electrolysers and fuel cells; advanced technologies to produce energy from nuclear processes with minimal waste from the fuel cycle, small modular reactors, and related best-in-class fuels; carbon capture, utilisation, and storage technologies; and , electricity and hydrogen -based technologies for low-carbon steel, both in primary and secondary steel production route, e.g. hydrogen based direct reduction, electric arc furnaces, electricity and hydrogen powered heating and reheating furnaces, and energy-system related energy efficiency technologies. They refer to the final products, specific components and specific machinery primarily used for the production of those products. They shall have reached a technology readiness level of at least 8. _________________ 66 ‘renewable energy' means ‘renewable energy’ as defined in Directive (EU) 2018/2001 of the European Parliament and of the Council of 11 December 2018 on the promotion of the use of energy from renewable sources 67 ‘sustainable alternative fuels’ means fuels covered by the Proposal for a Regulation of the European Parliament and of the Council on ensuring a level playing field for sustainable air transport, COM/2021/561 final and by the Proposal for a Regulation of the European Parliament and Council on the use of renewable and low-carbon fuels in maritime transport COM/2021/562 final.
Amendment 546 #
Proposal for a regulation
Article 3 – paragraph 1 – point d
Article 3 – paragraph 1 – point d
(d) ‘net-zero technology manufacturing and deployment project’ means a planned industrial facility or extension or repurposing of an existing facility manufacturing net-zero technologies or value chains making use of the net zero technologies;
Amendment 604 #
Proposal for a regulation
Article 4 – paragraph 1
Article 4 – paragraph 1
1. By …[3 months after the date of entry into force of this Regulation], Member States shall designate one national competent authority or one authority per competent region which shall be responsible for facilitating and coordinating the permit-granting process for net-zero technology manufacturing projects, including for net-zero strategic projects, and to provide advice on reducing administrative burden in line with Article 5.
Amendment 616 #
Proposal for a regulation
Article 4 – paragraph 2
Article 4 – paragraph 2
2. The national or regional competent authority referred to in paragraph 1 shall be the sole point of contact for the project promoter in the permit-granting process leading to a comprehensive decision for a given project and shall coordinate the submission of all relevant documents and information.
Amendment 621 #
Proposal for a regulation
Article 4 – paragraph 3 – introductory part
Article 4 – paragraph 3 – introductory part
3. The responsibilities of the national or regional competent authority referred to in paragraph 1 or the tasks related to it may be delegated to, or carried out by, another authority, for any given project, provided that:
Amendment 634 #
Proposal for a regulation
Article 4 – paragraph 5
Article 4 – paragraph 5
5. The national or regional competent authority shall take into consideration any valid studies conducted, and permits or authorisations issued, for a given project before the project entered the permit- granting process in accordance with this Article and shall not require duplicate studies and permits or authorisations, unless otherwise required under Union law.
Amendment 640 #
6. The national or regional competent authority shall ensure that applicants have easy access to information on and simple procedures for the settlement of disputes concerning the permit-granting process and the issuance of permits to construct or expand projects, including, where applicable, alternative dispute resolution mechanisms.
Amendment 748 #
Proposal for a regulation
Article 8 – paragraph 1
Article 8 – paragraph 1
1. When preparing plans, including zoning, spatial plans and land use plans, national, regional and local authorities shall, where appropriate, include in those plans provisions for the development of net-zero technology manufacturing projects, including net-zero strategic projects and all the necessary infrastructure. Priority shall be given to artificial and built surfaces, industrial sites, brownfield sites, and, where appropriate, greenfield sites not usable for agriculture and forestry.