76 Amendments of Gheorghe FALCĂ related to 2022/0396(COD)
Amendment 109 #
Proposal for a regulation
Recital 12
Recital 12
(12) In line with the waste hierarchy set out in Article 4(21) of Directive 2008/98/EC, and with the requirement set in paragraph 2 of Article 4 of the same Directive, which foresees that specific waste streams may depart from the hierarchy where this is in line with life- cycle thinking to deliver the best overall environmental outcome, the measures provided for under this Regulation aim at reducing the amount of packaging placed on the market in terms of its volume and weight, and preventing the generation of packaging waste, especially through packaging minimisation, avoiding packaging where it is not needed, and increased re-use of packagingand recycling of packaging while delivering the best environmental outcome. In addition, the measures aim at increasing the use of recycled content in packaging, especially in plastic packaging where the uptake of recycled content is very low, as well as higher recycling rates for all packaging and high quality of the resulting secondary raw materials while reducing other forms of recovery and final disposal.
Amendment 158 #
Proposal for a regulation
Recital 61
Recital 61
Amendment 171 #
Proposal for a regulation
Recital 67
Recital 67
(67) In order to reduce the increasing proportion of packaging that is single use and the growing amounts of packaging waste generated, it is necessary to establish quantitative re-use and refill targets on packaging in sectors, which have been assessed as having the greatest potential for packaging waste reduction, namely food and beverages for take-away, large-white goods and transport packaging. This was appraised based on factors such as existing systems for re-use, necessity of using packaging and the possibility of fulfilling the functional requirements in terms of containment, tidiness, health, hygiene and safety. Differences of the products and their production and distribution systems, were also taken into account. The setting of the targets is expected to support the innovation and increase the proportion of re-use and refill solutions. The use ofIn accordance with Article 4 §2 of Directive 2008/98/EC, restriction shall not apply for single -use packaging for food and beverages filled and consumed within the premises in the HORECA sector should not be alloweddelivering a better overall environmental outcome justified by life- cycle thinking, as well as a better overall economic and health impact. In accordance with Article 4 §2 of Directive 2008/98/EC, restriction shall not apply for single-use packaging delivering a better overall environmental outcome justified by life-cycle thinking, as well as a better overall economic and health impact.
Amendment 175 #
Proposal for a regulation
Recital 68
Recital 68
(68) To increase their effectiveness and ensure the equal treatment of economic operators, the re-use and refill targets should be placed on the economic operators. In cases of targets for beverages, they should be additionally placed also on the manufacturers, as these actors are able to control the packaging formats used for the products they offer. The targets should be calculated as a percentage of sales in reusable packaging within a system for re-use or through refill or, in case of transport packaging, as a percentage of uses. The targets should be material neutral. In order to ensure uniform conditions for the implementation of targets for re-use and refill, the power to adopt an implementing act in accordance with Article 291 of the Treaty on the methodology for their calculation, should be delegated to the Commission.
Amendment 216 #
Proposal for a regulation
Article 3 – paragraph 1 – point 4 a (new)
Article 3 – paragraph 1 – point 4 a (new)
(4a) `plastic packaging’ means a packaging that is wholly or predominantly (i.e. more than 50%) made of plastic.
Amendment 222 #
Proposal for a regulation
Article 3 – paragraph 1 – point 19
Article 3 – paragraph 1 – point 19
(19) ‘composite packaging’ means a unit of packaging made of two or more different materials, excluding materials used for labels, closures and sealing, which cannot be separated manually and therefore form a single integraloatings, linings, paints, inks, adhesives, closures and sealing which are considered as part of the weight of the main packaging material, which cannot be separated manually and therefore form a single integral unit, unless a given material constitutes an insignificant part of the packaging unit and in no case more than 15% of the total mass of the packaging unit;
Amendment 246 #
Proposal for a regulation
Article 3 – paragraph 1 – point 37
Article 3 – paragraph 1 – point 37
(37) ‘innovative packaging’ means a form of packaging that is manufactured using new materials, design or production processes, resulting in a significant improvement in the functions of packaging, such as containment, protection, handling, delivery or presentation of products, and in demonstrable environmental benefits, with the exception of packaging that is the result of modification of existing packaging for the sole purpose of improved presentation of products and marketing;
Amendment 248 #
Proposal for a regulation
Recital 12
Recital 12
(12) In line with the waste hierarchy set out in Article 4(21) of Directive 2008/98/EC, with the requirement set in paragraph 2 of Article 4 of the same Directive, which foresees that specific waste streams may depart from the hierarchy where this is and in line with life-cycle thinking to deliver the best overall environmental outcome, the measures provided for under this Regulation aim at reducing the amount of packaging placed on the market in terms of its volume and weight, and preventing the generation of packaging waste, especially through packaging minimisation, avoiding packaging where it is not needed, and increased re-use of packagingand recycling of packaging while delivering the best environmental outcome. In addition, the measures aim at increasing the use of recycled content in packaging, especially in plastic packaging where the uptake of recycled content is very low, as well as higher recycling rates for all packaging and high quality of the resulting secondary raw materials while reducing other forms of recovery and final disposal.
Amendment 360 #
Proposal for a regulation
Article 7 – paragraph 1 – introductory part
Article 7 – paragraph 1 – introductory part
1. From 1 January 2030, the plastic part in packaging shall contain the following minimum percentage of recycled content recovered from post-consumer plastic waste, per unit of packaging or biobased content:
Amendment 362 #
Proposal for a regulation
Article 7 – paragraph 1 – point b
Article 7 – paragraph 1 – point b
Amendment 366 #
Proposal for a regulation
Article 7 – paragraph 1 – point d
Article 7 – paragraph 1 – point d
(d) 35 % for plastic packaging other than those referred to in points (a), (b) and (c).
Amendment 378 #
Proposal for a regulation
Article 7 – paragraph 2 – introductory part
Article 7 – paragraph 2 – introductory part
2. From 1 January 2040, the plastic part in packaging shall contain the following minimum percentage of recycled content recovered from post-consumer plastic waste, per unit of packaging or biobased content:
Amendment 380 #
Amendment 382 #
Proposal for a regulation
Article 7 – paragraph 2 – point a a (new)
Article 7 – paragraph 2 – point a a (new)
(aa) Targets shall be calculated as an average of the plastic packaging placed by a producer on the Union market.
Amendment 384 #
Proposal for a regulation
Article 7 – paragraph 3 – point d a (new)
Article 7 – paragraph 3 – point d a (new)
(da) packaging for non-medical products which should be manufactured to ISO standard 15378 to ensure the safety and quality of the product for consumer health.
Amendment 390 #
Proposal for a regulation
Article 7 – paragraph 4
Article 7 – paragraph 4
4. Paragraphs 1 and 2 shall not apply to compostable plastic packaging nor to bio-based plastic packaging, to lacquers, inks, adhesives, cold seal, varnishes, primers, glues, coatings and all liquid process components used on packaging.
Amendment 396 #
Proposal for a regulation
Article 7 – paragraph 6
Article 7 – paragraph 6
6. By 1 January 2030, the financial contributions paid by producers to comply with their extended producer responsibility obligations as laid down in Article 40 shall be modulated based on the percentage of either recycled or biobased content used in the plastic packaging.
Amendment 409 #
Proposal for a regulation
Article 7 – paragraph 7
Article 7 – paragraph 7
7. By 31 December 2026, the Commission is empowered to adopt implementing acts establishing the methodology for the calculation and verification of the percentage of recycled content recovered from post-consumer plastic waste, per unit of plastic packaging, and the format for the technical documentation referred to in Annex VII. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 59(3).
Amendment 411 #
Proposal for a regulation
Article 7 – paragraph 8
Article 7 – paragraph 8
8. As of 1 January 2029, the calculation and verification of the percentage of recycled content contained in plastic packaging under paragraph 1 shall comply with the rules laid down in the implementing act referred to in paragraph 7.
Amendment 427 #
Proposal for a regulation
Article 8 – paragraph 1
Article 8 – paragraph 1
1. By [OP: please insert the date = 24 months from the entry into force of this Regulation], packaging referred to in Article 3(1), points (f) and (g), sticky labels attached to fruit and vegetables and very lightweight plastic carrier bags shall be compostable in industrially controlled conditions in bio-waste treatment facilities.
Amendment 437 #
Proposal for a regulation
Article 9 – paragraph 2
Article 9 – paragraph 2
2. Packaging not necessary to comply with any of the performance criteria set out in Annex IV and packaging with characteristics that are only aimed to increase the perceived volume of the product, including double walls, false bottoms, and unnecessary layers, shall not be placed on the market, unless the packaging design is subject to geographical indications of origin protected under Union legislation.
Amendment 444 #
Proposal for a regulation
Recital 62
Recital 62
Amendment 461 #
Proposal for a regulation
Recital 67
Recital 67
(67) In order to reduce the increasing proportion of packaging that is single use and the growing amounts of packaging waste generated, it is necessary to establish quantitative re-use and refill targets on packaging in sectors, which have been assessed as having the greatest potential for packaging waste reduction, namely food and beverages for take-away, large-white goods and transport packaging. This was appraised based on factors such as existing systems for re-use, necessity of using packaging and the possibility of fulfilling the functional requirements in terms of containment, tidiness, health, hygiene and safety. Differences of the products and their production and distribution systems, were also taken into account. The setting of the targets is expected to support the innovation and increase the proportion of re-use and refill solutions. The use ofIn accordance with Article 4(2) of Directive 2008/98/EC, restriction shall not apply for single -use packaging for food and beverages filled and consumed within the premises in the HORECA sector should not be alloweddelivering a better overall environmental outcome justified by life- cycle thinking, as well as a better overall economic and health impact.
Amendment 468 #
Proposal for a regulation
Recital 68
Recital 68
(68) To increase their effectiveness and ensure the equal treatment of economic operators, the re-use and refill targets should be placed on the economic operators. In cases of targets for beverages, they should be additionally placed also on the manufacturers, as these actors are able to control the packaging formats used for the products they offer. The targets should be calculated as a percentage of sales in reusable packaging within a system for re-use or through refill or, in case of transport packaging, as a percentage of uses. The targets should be material neutral. In order to ensure uniform conditions for the implementation of targets for re-use and refill, the power to adopt an implementing act in accordance with Article 291 of the Treaty on the methodology for their calculation, should be delegated to the Commission.
Amendment 519 #
Proposal for a regulation
Article 22
Article 22
Amendment 556 #
Proposal for a regulation
Article 26 – paragraph 2
Article 26 – paragraph 2
Amendment 575 #
Proposal for a regulation
Article 26 – paragraph 3
Article 26 – paragraph 3
Amendment 590 #
Proposal for a regulation
Article 26 – paragraph 4
Article 26 – paragraph 4
Amendment 608 #
Proposal for a regulation
Article 26 – paragraph 5
Article 26 – paragraph 5
Amendment 619 #
Proposal for a regulation
Article 26 – paragraph 6
Article 26 – paragraph 6
Amendment 633 #
Proposal for a regulation
Article 3 – paragraph 1 – point 18 a (new)
Article 3 – paragraph 1 – point 18 a (new)
(18a) ‘plastic packaging’ means a packaging that is wholly or predominantly (i.e. more than 50%) made of plastic.
Amendment 640 #
Proposal for a regulation
Article 26 – paragraph 7 – point b
Article 26 – paragraph 7 – point b
Amendment 643 #
Proposal for a regulation
Article 3 – paragraph 1 – point 19
Article 3 – paragraph 1 – point 19
(19) ‘composite packaging’ means a unit of packaging made of two or more different materials, excluding materials used for labels, closures and sealing, which cannot be separated manually and therefore form a single integraloatings, linings, paints, inks, adhesives, closures and sealing which are considered as part of the weight of the main packaging material, which cannot be separated manually and therefore form a single integral unit, unless a given material constitutes an insignificant part of the packaging unit and in no case more than 15% of the total mass of the packaging unit;
Amendment 652 #
Proposal for a regulation
Article 26 – paragraph 8 – point b
Article 26 – paragraph 8 – point b
Amendment 664 #
Proposal for a regulation
Article 26 – paragraph 9 – point b
Article 26 – paragraph 9 – point b
Amendment 676 #
Proposal for a regulation
Article 26 – paragraph 10 – point b
Article 26 – paragraph 10 – point b
Amendment 723 #
Proposal for a regulation
Article 26 – paragraph 15
Article 26 – paragraph 15
15. Economic operators shall be exempted from the obligation to meet the targets in paragraphs 2 to 6 if, during a calendar year, they have a sales area of not more than 100 m2, including also all storage and dispatch areas and if it is not technically feasible to use reusable packaging or to obtain access to the infrastructure necessary for the functioning of a re-use system.
Amendment 732 #
Proposal for a regulation
Article 26 – paragraph 15 a (new)
Article 26 – paragraph 15 a (new)
15a. Economic operators shall be exempted from the obligation to meet the targets in this article when duly justified by concerns related to public health, food hygiene and safety, product integrity or environmental issues.
Amendment 735 #
Proposal for a regulation
Article 26 – paragraph 15 b (new)
Article 26 – paragraph 15 b (new)
15b. Economic operators shall be exempted from the obligation to meet the targets in this article if, in accordance with paragraph 2 of Article 4 of Directive 2008/98/EC, they can show that alternative packaging formats deliver a better overall environmental outcome justified by life-cycle thinking, as well as a better overall economic and human health impact.
Amendment 739 #
Proposal for a regulation
Article 26 – paragraph 16 – point a
Article 26 – paragraph 16 – point a
Amendment 747 #
Proposal for a regulation
Article 26 – paragraph 16 – point c
Article 26 – paragraph 16 – point c
Amendment 779 #
Proposal for a regulation
Article 43 – paragraph 1
Article 43 – paragraph 1
1. By 1 January 2029, Member States shall ensure that systems are set up to provide for the return and separate collection of 90% of all packaging waste from the end users for each packaging format listed in Table 1 of Annex II, in a given year, in order to ensure that it is treated in accordance with Articles 4 and 13 of Directive 2008/98/EC, and to facilitate its preparation for re-use and high quality recycling.
Amendment 790 #
Proposal for a regulation
Article 43 – paragraph 3 a (new)
Article 43 – paragraph 3 a (new)
3a. By 1 January 2029, the final distributor making available on the market food and beverages filled and consumed within the premises in the HORECA sector shall ensure that separate collection systems are set up for the different fractions of packaging waste materials, to help the consumer sort packaging waste.
Amendment 793 #
Proposal for a regulation
Article 43 – paragraph 3 b (new)
Article 43 – paragraph 3 b (new)
3b. By 1 January 2029, Member States shall ensure that, in public spaces, separate collection systems are set up for the different fractions of packaging waste materials used in sales packaging in the market of food and beverages filled and consumed for take-away, to help the consumer sort packaging waste.
Amendment 808 #
Proposal for a regulation
Article 45 – paragraph 2 – point b
Article 45 – paragraph 2 – point b
Amendment 809 #
Proposal for a regulation
Article 45 – paragraph 2 – point c
Article 45 – paragraph 2 – point c
Amendment 812 #
Proposal for a regulation
Article 47 – paragraph 4
Article 47 – paragraph 4
4. Composite packaging and other packaging composed of more than one material shall be calculated and reported per material contained in the packaging. Member States may derogate from this requirement where a given material constitutes an insignificant part of the packaging unit, and in no case more than 15 % of the total mass of the packaging unit.
Amendment 822 #
Proposal for a regulation
Article 62 – paragraph 1
Article 62 – paragraph 1
1. By [OP: Please insert the date = 24 months after the date of entry into force of this Regulation], Member States shall lay down the rules on penalties applicable to infringements of this Regulation and shall take all measures necessary to ensure that they are implemented. The penalties provided for shall be effective, proportionate and dissuasive. Failure to comply with the requirements of Articles 21 to 26 shall be sanctioned by an administrative fine imposed on the relevant economic operator.
Amendment 823 #
Proposal for a regulation
Article 62 – paragraph 2
Article 62 – paragraph 2
Amendment 838 #
Proposal for a regulation
Annex V
Annex V
Amendment 1114 #
Proposal for a regulation
Article 7 – paragraph 1 – introductory part
Article 7 – paragraph 1 – introductory part
1. From 1 January 2030, the plastic part in packaging shall contain the following minimum percentage of recycled content recovered from post-consumer plastic waste, per unit of packaging or biowaste content:
Amendment 1125 #
Proposal for a regulation
Article 7 – paragraph 1 – point b
Article 7 – paragraph 1 – point b
Amendment 1139 #
Proposal for a regulation
Article 7 – paragraph 1 – point d
Article 7 – paragraph 1 – point d
(d) 35 % for plastic packaging other than those referred to in points (a), (b) and (c).
Amendment 1174 #
Proposal for a regulation
Article 7 – paragraph 2 – introductory part
Article 7 – paragraph 2 – introductory part
2. From 1 January 2040, the plastic part in packaging shall contain the following minimum percentage of recycled content recovered from post-consumer plastic waste, per unit of packaging or biobosed content:
Amendment 1176 #
Proposal for a regulation
Article 7 – paragraph 2 – point a
Article 7 – paragraph 2 – point a
Amendment 1211 #
Proposal for a regulation
Article 7 – paragraph 3 a (new)
Article 7 – paragraph 3 a (new)
3a. packaging for non-medical products which shall be manufactured to ISO standard 15378 to ensure the safety and quality of the product for consumer health.
Amendment 1241 #
Proposal for a regulation
Article 7 – paragraph 6
Article 7 – paragraph 6
6. By 1 January 2030, the financial contributions paid by producers to comply with their extended producer responsibility obligations as laid down in Article 40 shall be modulated based on the percentage of either recycled or biobased content used in the plastic packaging.
Amendment 1268 #
Proposal for a regulation
Article 7 – paragraph 7
Article 7 – paragraph 7
7. By 31 December 2026, the Commission is empowered to adopt implementing acts establishing the methodology for the calculation and verification of the percentage of recycled content recovered from post-consumer plastic waste, per unit of plastic packaging, and the format for the technical documentation referred to in Annex VII. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 59(3).
Amendment 1279 #
Proposal for a regulation
Article 7 – paragraph 8
Article 7 – paragraph 8
8. As of 1 January 2029, the calculation and verification of the percentage of recycled content contained in plastic packaging under paragraph 1 shall comply with the rules laid down in the implementing act referred to in paragraph 7.
Amendment 1419 #
Proposal for a regulation
Article 9 – paragraph 2
Article 9 – paragraph 2
2. Packaging not necessary to comply with any of the performance criteria set out in Annex IV and packaging with characteristics that are only aimed to increase the perceived volume of the product, including double walls, false bottoms, and unnecessary layers, shall not be placed on the market, unless the packaging design is subject to geographical indications of origin protected under Union legislation.
Amendment 1693 #
Proposal for a regulation
Article 22
Article 22
Amendment 1802 #
Proposal for a regulation
Article 26 – paragraph 2
Article 26 – paragraph 2
Amendment 1832 #
Proposal for a regulation
Article 26 – paragraph 3
Article 26 – paragraph 3
Amendment 1867 #
Proposal for a regulation
Article 26 – paragraph 4
Article 26 – paragraph 4
Amendment 1888 #
Proposal for a regulation
Article 26 – paragraph 5
Article 26 – paragraph 5
Amendment 1914 #
Proposal for a regulation
Article 26 – paragraph 6
Article 26 – paragraph 6
Amendment 1950 #
Proposal for a regulation
Article 26 – paragraph 7 – point b
Article 26 – paragraph 7 – point b
Amendment 1966 #
Proposal for a regulation
Article 26 – paragraph 8 – point b
Article 26 – paragraph 8 – point b
Amendment 1991 #
Proposal for a regulation
Article 26 – paragraph 9 – point b
Article 26 – paragraph 9 – point b
Amendment 2020 #
Proposal for a regulation
Article 26 – paragraph 10 – point b
Article 26 – paragraph 10 – point b
Amendment 2108 #
Proposal for a regulation
Article 26 – paragraph 15
Article 26 – paragraph 15
15. Economic operators shall be exempted from the obligation to meet the targets in paragraphs 2 to 6 if, during a calendar year, they have a sales area of not more than 100 m2, including also all storage and dispatch areas and if it is not technically feasible to use reusable packaging or to obtain access to the infrastructure necessary for the functioning of a re-use system.
Amendment 2114 #
Proposal for a regulation
Article 26 – paragraph 15 a (new)
Article 26 – paragraph 15 a (new)
Amendment 2122 #
Proposal for a regulation
Article 26 – paragraph 15 b (new)
Article 26 – paragraph 15 b (new)
15b. Economic operators shall be exempted from the obligation to meet the targets in this article if, in accordance with paragraph 2 of Article 4 of Directive 2008/98/EC, they can show that alternative packaging formats deliver a better overall environmental outcome justified by life-cycle thinking, as well as a better overall economic and human health impact.
Amendment 2143 #
Proposal for a regulation
Article 26 – paragraph 16 – point c
Article 26 – paragraph 16 – point c
Amendment 2302 #
Proposal for a regulation
Article 43 – paragraph 1
Article 43 – paragraph 1
1. By 1 January 2029, Member States shall ensure that systems are set up to provide for the return and the separate collection of 90% of all packaging waste from the end users for each packaging format listed in Table 1 of Annex II, in a given year, in order to ensure that it is treated in accordance with Articles 4 and 13 of Directive 2008/98/EC, and to facilitate its preparation for re-use and high quality recycling.
Amendment 2349 #
Proposal for a regulation
Article 43 – paragraph 1
Article 43 – paragraph 1
1. By 1 January 2029, Member States shall ensure that systems are set up to provide for the return and the separate collection of 90% of all packaging waste from the end users for each packaging format listed in Table 1 of Annex II, in a given year, in order to ensure that it is treated in accordance with Articles 4 and 13 of Directive 2008/98/EC, and to facilitate its preparation for re-use and high quality recycling.