BETA

Activities of Oreste ROSSI related to 2010/0195(COD)

Plenary speeches (4)

Explanations of vote
2016/11/22
Dossiers: 2010/0195(COD)
Explanations of vote
2016/11/22
Dossiers: 2010/0195(COD)
Explanations of vote
2016/11/22
Dossiers: 2010/0195(COD)
Explanations of vote
2016/11/22
Dossiers: 2010/0195(COD)

Amendments (20)

Amendment 35 #
Proposal for a directive - amending act
Recital 5
(5) During the transition from Stage III A to Stage III B, the percentage of the number of engines used for application other than propulsion of railcars and locomotives placed on the market under the flexibility scheme, should be increased from 20% to 50% of the equipment manufacturer's annual salesquantity of equipment placed on the market with engines in that category. The maximumoptional alternative that a fixed number of engines that may be placed on the market under the flexibility scheme should be adapted accordingly.
2011/02/23
Committee: ENVI
Amendment 39 #
Proposal for a directive - amending act
Recital 6
(6) The rules applicable to the flexibility scheme should be adapted to extend theits application of that scheme to engines for use in propulsion of railcars and locomotives.
2011/02/23
Committee: ENVI
Amendment 45 #
Proposal for a directive - amending act
Recital 7
(7) The measures provided in this Directive reflect a temporary difficulty faced by the manufacturing sector. They should therefore be restricted to the transition from Stage III A to Stage III B and expire by 31 December 2013 at the latest; as such, these shall be restricted to Stage III B.
2011/02/23
Committee: ENVI
Amendment 51 #
Proposal for a directive - amending act
Article 1 – point -1 (new)
Directive 97/68/CE
Article 2- last indent
(-1) In Article 2 the last indent is replaced by the following: – flexibility scheme shall mean the exemption procedure whereby a Member State allows placing on the market of a limited quantity of engines according to Article 10.
2011/02/23
Committee: ENVI
Amendment 53 #
Proposal for a directive - amending act
Article 1 – point -1 a (new)
Directive 97/68/CE
Article 2 - new indent
(-1a) In Article 2 the following new indent is added: – engine category shall mean the engine classification combining the power range, the exhaust emission stage requirements and the engine classification according to Section I of Annex I.
2011/02/23
Committee: ENVI
Amendment 56 #
Proposal for a directive - amending act
Article 1 – point 1
Directive 97/68/CE
Article 4 - paragraph 6
1. Article 4(6) is replaced by the following: (6) ‘Compression ignition engines for use other than in propulsion of inland waterway vessels may be placed on the market under a flexibility scheme in accordance with the procedure referred to in Annex XIII in addition to paragraphs 1 to 5.’ deleted Or. en (See amendment on Article 1 - paragraph 1 - point 1 - introductory part)
2011/02/23
Committee: ENVI
Amendment 70 #
Proposal for a directive - amending act
Article 1 – point 2 – point a
Directive 97/68/CE
Article 10 – paragraph 7
(7) Member States shall permit the placing on the market of engines, as defined in Section 1 of Annex I under A(i), A(ii), A(iv) and A(v), under the flexibility scheme in accordance with the provisions in Annex XIII. Spark ignited engines, as defined in Section 1 of Annex I under A(iii), and engines for propulsion of inland waterways vessels are excluded from this procedure. The flexibility scheme shall start when placing on the market of engines becomes compulsory for any given Stage and shall have the duration of any given stage, but not more than three years. The engines shall be type approved according to the Stage immediately preceding the one under consideration.
2011/02/23
Committee: ENVI
Amendment 73 #
Proposal for a directive - amending act
Article 1 – point 2 – point b
Directive 97/68/CE
Article 10 – paragraph 8
(b) The following paragraph 8 is added: ‘(8) The flexibility scheme, in accordance with the provisions of Section 1.2 of Annex XIII, shall apply only for the transition from Stage III A to Stage III B and expire on 31 December 2013.’deleted
2011/02/23
Committee: ENVI
Amendment 81 #
Proposal for a directive - amending act
Annex - introductory part
Directive 97/68/CE
-
Section 1 of Annex XIII is replaced by the following:
2011/02/23
Committee: ENVI
Amendment 83 #
Proposal for a directive - amending act
Annex
Directive 97/68/EC
Annex XIII – section 1 - point 1.1.
1.1. With the exception of the transition period between Stage III A and Stage III B, an OEM that wishes to make use of the flexibility schemeout prejudice to 1.2, an OEM that wishes to make use of the flexibility scheme, with the exception of engines for propulsion of locomotives, shall request permission from any approval authority to purchase from his engine supplifor the OEM’s engine manufacturers, the quantities of engines described in sections 1.1.1. and 1.1.2., that do not comply with the current emission limit values, but are approved to the nearest previous stage of emission limitso place on the market engines intended for the OEM’s exclusive use. With the exception of Stage IIIB, the quantities of engines shall not exceed those described in sections 1.1.1. and 1.1.2.
2011/02/23
Committee: ENVI
Amendment 85 #
Proposal for a directive - amending act
Annex
Directive 97/68/EC
Annex XIII – section 1 - point 1.1.1
1.1.1. The number of engines placed on the market under a flexibility scheme shall, in each engine category, not exceed 20 % of the OEM's annual salesquantity of equipment placed on the market with engines in that engine category, (calculated as the average of the latest 5five years sales on the EU market). Where an OEM has. In case an OEM placed on the marketed equipment in the EU for a period offor less than 5five years, the average wishall be calculated based on the period for which the OEM has marketplaced equipment ion the EUmarket.
2011/02/23
Committee: ENVI
Amendment 87 #
Proposal for a directive - amending act
Annex
Directive 97/68/EC
Annex XIII – section 1 - point 1.1.2
1.1.2. As an optional alternative to section 1.1.1. and with the exception of engines for use in propulsion of railcars and locomotives, the OEM may seek permission for hithe OEM’s engine supplimanufacturers to place on the market a fixed number of engines undefor the flexibility schemOEM’s exclusive use. The number of engines in each engine category shall not exceed the following values:
2011/02/23
Committee: ENVI
Amendment 88 #
Proposal for a directive - amending act
Annex
Directive 97/68/EC
Annex XIII – section 1 - point 1.1.2 - table - title
Engine CategoryPower Range
2011/02/23
Committee: ENVI
Amendment 91 #
Proposal for a directive - amending act
Annex
Directive 97/68/EC
Annex XIII – section 1 - point 1.2.
1.2. During the transition period from Stage III A to Stage III B, with the exception of engines for use in propulsion of railcars and locomotives, an OEM that wishes to make use of the flexibility scheme shall request permission from any approval authority to purchase from his engine suppliers, tfor the OEM’s engine manufacturers to place on the market engines intended for the OEM’s exclusive use. The quantities of engines shall not exceed those described in sections 1.2.1. and 1.2.2., that do not comply with the current emission limit values, but are approved to the nearest previous stage of emission limits The engines shall meet the requirements of Article 10(7).
2011/02/23
Committee: ENVI
Amendment 93 #
Proposal for a directive - amending act
Annex
Directive 97/68/EC
Annex XIII – section 1 - point 1.2.1.
1.2.1. The number of engines placed on the market under sucha flexibility scheme shall, in each engine category, not exceed 50 % of the OEM's annual salesquantity of equipment placed on the market with engines in that engine category, (calculated as the average of the latest 5five years sales on the EU market). Where an OEM has. In case an OEM placed on the marketed equipment in the EU for a period offor less than 5five years, the average wishall be calculated based on the period for which the OEM has marketplaced equipment ion the EUmarket.
2011/02/23
Committee: ENVI
Amendment 97 #
Proposal for a directive - amending act
Annex
Directive 97/68/EC
Annex XIII – section 1 - point 1.2.2.
1.2.2. As an optional alternative to section 1.2.1., the OEM may seek permission for hithe OEM’s engine supplimanufacturers to place on the market a fixed number of engines undefor the flexibility schemOEM’s exclusive use. The number of engines in each engine category shall not exceed the following values:
2011/02/23
Committee: ENVI
Amendment 98 #
Proposal for a directive - amending act
Annex
Directive 97/68/EC
Annex XIII – section 1 - point 1.2.2. - table - title
Engine CategoryPower Range
2011/02/23
Committee: ENVI
Amendment 100 #
Proposal for a directive - amending act
Annex
1.3 As regards engines for use in propulsion of railcars, the flexibility scheme as defined in section 1.1.1. shall be applicable as from the transition period between Stage III A and Stage III B.deleted
2011/02/23
Committee: ENVI
Amendment 103 #
Proposal for a directive - amending act
Annex
Directive 97/68/EC
Annex XIII – section 1 - point 1.4.
1.4 As regards engines for use in propulsion of locomotives, during the transition period between Stage III A and Stage III B anthe OEM may seek permission for hithe OEM’s engine supplimanufacturers to place on the market a maximum of 12 engines for use in propulsion of locomotthe OEM’s exclusives under the flexibility schemse.
2011/02/23
Committee: ENVI
Amendment 112 #
Proposal for a directive - amending act
Annex
Directive 97/68/EC
Annex XIII – section 1 - point 1.5.introductory part
1.5. The OEM shall include in his the application to an approval authority the following information:
2011/02/23
Committee: ENVI